Automatic Night Light
In this project, you will make use of the LDR sensor on the TOP to create a light-sensitive night light with one of the LEDs.
In this project, you will create a robot that can drive around using the DRIVE page on the dashboard, the command line, or a program.
In this project, you will build on the Rainbow LED project by turning the JackBord into a dice. Using the random function to generate a number and assigning each LED a value (all 5 lit up represents six) makes a very simple electronic dice.
Rainbow LED Display
In this project, you will utilise all five LEDs on the TOP to create a rainbow. With proper commands, you can even make it pulse in sequence.
In this project, you will use your JackBord to play soccer! We do this by turning an ice cream container into a scoop or a foot so the JackBord can push a ball from one point to another.
WiFi Signal Dial
In this project, we are going to turn the JackBord into a dial so we can visually see the strength of the WiFi signal it is currently receiving. We will use an RC servo, which will move its arm in response to the WiFi strength.